Downloads
GapSwitch 416X
The Ultrasonic Point Level System 416X Series is an ideal solution for detecting liquid in compact spaces.
Level Hunter III and LXD Transducer
The Level Hunter III provides non-contacting ultrasonic level measurement and alarm control with the latest ECHO LOGIC algorithms and advanced microprocessor technology with DSP Processing. It can accurately measure level and volume (pre-configured tank shapes) and perform alarm and fixed pump control for up to 6 pumps. Standard features include: 1 4-20mA output, 4 SPDT Relays, LED’s for alarm/pump status and 6 button Quick Setup programming. The LXD Transducer series comes in ranges of 5, 10, 15 meter ranges.
AC Surge Protection
The ECHO Arrow Hunter PLUS Version 3 range of non-invasive flowmeters utilizes Transit-time ultrasonic technology for the accurate flow measurement of clean or dirty liquids and liquified gases in full pipes. The AH+FX-V3 is designed for permanent installation on applications where advanced options and configurations are required. The Full Spec AH+FS-V3 offers dual channel and Energy measurement capabilities.
The Bullet – Ultrasonic Level Measurement
The Bullet provides non-contacting ultrasonic level measurement with the latest digital echo processing for superb performance. It is an all-in-one Loop-powered (2-wire) ultrasonic transmitter with 4 buttons for easy programming. It comes standard with a 2″ NPT threaded PVDF housing for simple mounting requirements. Accuracy is +/- 0.2% of range. Two models are available for 7 or 10 meter ranges.
Oyster 700 Series – Submersible Pressure Transducer (SS Cage not included)
The Oyster 700 Series provide accurate and reliable level measurement with the latest miniature microprocessor technology built right in the submersible pressure transducer. The transmitter contains a piezo-resistive sensor that outputs a signal proportional to the hydrostatic pressure on the diaphragm. This signal is compared to the atmospheric pressure via the vent tube and compensated to the water temperature for years of maintenance-free operation (no periodic calibrations needed).
DOWNLOADS:
TDR Hunter
The ECHO TDR Hunter is an advanced radar level transmitter that utilizes the latest state-of-the-art technology to provide reliable measurement and control. High in functionality, the TDR Hunter offers accurate and reliable measurement of liquids, slurries and solids.
DOWNLOADS:
Radar Hunter
The ECHO Radar Hunter is an advanced radar level transmitter that utilizes the latest state-of-the-art technology to provide reliable measurement and control. High in functionality, the Radar Hunter offers non-contact measurement of liquids, slurries and solids.
DOWNLOADS:
Process Meter 9300 Series
Low-cost Alarm & Pump Controller. Displays level or volume with any analog or voltage input. It can control and alternate up to 4 pumps with SPDT Relays. Has a 24 VDC power supply to utilize 2-wire instruments.
Heated Enclosure
Flow Hunter III and LXD-04P
The Flow Hunter III provides non-contact ultrasonic open channel flow measurement with the lastest digital ECHO Process for superb performance. It Can accurately measure to +/-0.25% of measured range of 6mm (whichever is greater).
DOWNLOADS:
Arrow Hunter PLUS V3 – Fixed Wall Mount Clamp-on Flowmeter
The ECHO Arrow Hunter PLUS Version 3 range of non-invasive flowmeters utilizes Transit-time ultrasonic technology for the accurate flow measurement of clean or dirty liquids and liquified gases in full pipes. The AH+FX-V3 is designed for permanent installation on applications where advanced options and configurations are required. The Full Spec AH+FS-V3 offers dual channel and Energy measurement capabilities.
Arrow Hunter PLUS – Portable HandHeld Clamp-on Flowmeter
The ECHO Arrow Hunter PLUS range of non-invasive flowmeters utilizes Transit-time ultrasonic technology for the accurate flow measurement of clean or dirty liquids in full pipes. The AH+HH is designed for simple portable applications where flow display and data logging are the only requirements. Includes case and mounting straps.
DOWNLOADS:
Arrow Hunter PLUS – Portable BTU Energy Flowmeter
Arrow Hunter PLUS – Portable BTU Energy Flowmeter
The ECHO Arrow Hunter PLUS range of non-invasive flowmeters utilizes Transit-time ultrasonic technology for the accurate flow measurement of clean or dirty liquids in full pipes. The AH+BTU is designed for simple portable applications where flow display and data logging are the only requirements. Includes case and mounting straps.
DOWNLOADS:
MagHunter
MAG HUNTER is a volume flow rate meter for conductive fluids in pipelines. It allows measurement of flow rates in both directions with high accuracy in a wide range of flow rates (0.3 – 40 ft/s).
VibraSwitch 200 Series – Vibrating Level Switch
The ECHO VibraSwitch 200 Series for solids uses a piezoelectric crystal that vibrates at a known frequency. When the material comes in contact, the oscillation changes and forces a relay to activate. As the material lowers, the normal oscillation resumes and the relay goes back to normal state. The Single Blade (Stocktrol) and Dual Blade versions resist material build-up resulting in maintenance-free operation.
DOWNLOADS:
RotoSwitch 300 Series – Rotary Paddle Level Switch
The ECHO RotoSwitch 300 Series is a range of rotating paddle level switches for monitoring and controlling bulk solids level. A synchronous motor rotates the paddle utlizing a magnetic drive. As the material rises the paddle rotation is impeded from moving and the increased motor torque activates the relay switch and stops the motor. A spring mechanism reactivates the motor and returns the switch to normal state.
DOWNLOADS:
CapSwitch 500 Series – Capacitance Level Switch
The ECHO CapSwitch 500 is a reliable capacitance level switch with no moving parts. The state of the art sensing technology is Impulse RF Admittance measurement with an active guard. This provides excellent level detection while being insensitive to material buildup. It can be used for liquids, slurries, powders and bulk solid materials.
Flow Switch – Nonintrusive Liquid Flow/ No Flow Switch
The ECHO FlowSwitch is a simple, reliable Doppler flow switch and liquid velocity meter. It is an encapsulated self-contained clamp-on flow sensor for dirty water and wastewater flow conditions. It is low cost and pre-calibrated from the factory 0-20 ft/s (6.096 m/s) equals 0-5 VDC proportionally (higher velocities available as an option). It can be custom ordered to any velocity range or provide a TTL Pulse output up to 5000 Hz with a K factor supplied on the calibration sheet.
Stainless Steel Cage
